1 power entry modules without line filter kea-print https://www.schurter.com /pg05 connectors iec appliance inlet c14 with fuseholder 1- or 2-pole for pcb order required accessories separately screw-on mounting snap-in version see below: approvals and compliances c14 70 c description - panel mount : screw-on version from front or rear side, snap-in version from front side - 2 functions : appliance inlet protection class i , fuseholder for fuse-links 5 x 20 mm 1- or 2-pole - v-lock notch standard - meets the requirements of iec 60335-1 for appliances in unattended use. this includes the enhanced requirements of glow wire tests acc. to iec 60695-2-12 and -13. - for pcb mounting unique selling proposition - very compact design - components internally wired - v-lock cord retaining - suitable in medical applications characteristics - all single elements are already wired - plug removal necessary for fuse-link replacement - suitable for use in equipment according to iec/ul 60950 other versions on request - with solder terminals - for protection class ii weblinks pdf datasheet, html-datasheet, general product information, distributor- stock-check, accessories, detailed request for product, landing page technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 10 a / 250 vac; 60 hz dielectric strength > 3 kvac between l-n > 4 kvac between l/n-pe (1 min/50 hz) allowable operation tempe - rature -25 c to 70 c ip-protection from front side ip 40 acc. to iec 60529 insulation cover suitable for appliances with protection class i acc. to iec 61140 terminal for pcb 1,6 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 1.5/2/2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet/-outlet c14 / c18 acc. to iec 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class i fuseholder 1 or 2 pole, shocksafe category pc2 acc. to iec 60127-6, for fuse-links 5 x 20 mm rated power acceptance @ ta 23 c 5 x 20: 2 w (1 pole)/ 1.6 w (2-pole) per pole power acceptance @ ta > 23c admissible power acceptance at higher ambient temperature see derating cur - ves approvals and compliances detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in details about approvals approvals the approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. approval reference type: kea
2 power entry modules without line filter kea-print https://www.schurter.com /pg05 connectors approval logo certificates certification body description vde approvals vde certificate number: 40046508 ul approvals ul ul file number: e93617 csa approvals csa csa certification record: 38456 cqc approvals cqc ccc certificate number: product standards product standards that are referenced organization design standard description designed according to iec 60320-1 appliance couplers for household and similar general purposes designed according to iec 60127-6 miniature fuses. part 6. fuse-holders for miniature fuse-links designed according to iec 61058-1 switches for appliances. part 1. general requirements designed according to ul 498 standard for attachment plugs and receptacles designed according to csa c22.2 no. 42 general use receptacles, attachment plugs, and similar wiring devices application standards application standards where the product can be used organization design standard description designed for applications acc. iec/ul 60950 iec 60950-1 includes the basic requirements for the safety of information technology equipment. designed for applications acc. iec 60601-1 medical electrical equipment - part 1: general requirements for basic safety and essential performance designed for applications acc. iec 60335-1 safety of electrical appliances for household and similar purposes. meets the requirements for appliances in unattended use. this includes the en - hanced requirements of glow wire tests acc. to iec 60695-2-12 and -13. compliances the product complies with following guide lines identification details initiator description ce declaration of conformity schurter ag the ce marking declares that the product complies with the applicable requirements laid down in the harmonisation of community legislation on its affixing in accordance with eu regulation 765/2008. rohs schurter ag eu directive rohs 2011/65/eu china rohs schurter ag the law sj / t 11363-2006 (china rohs) has been in force since 1 march 2007. it is similar to the eu directive rohs. reach schurter ag on 1 june 2007, regulation (ec) no 1907/2006 on the registration, evaluation, authorization and restriction of chemicals 1 (abbreviated as "reach") entered into force. schurter ag v-lock system are based on a matching plug-dose combination. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. white paper glow wire test schurter ag meets the requirements of iec 60335-1 for appliances in unattended use. this includes the enhanced requirements of glow wire tests acc. to iec 60695-2-12 and -13. medical equipment schurter ag suitable for use in medical equipment according to iec/ul 60601-1
3 power entry modules without line filter kea-print https://www.schurter.com /pg05 connectors dimensions [mm] screw-on mounting type kea-print r2.4 m3/?3.6 31.6 27.6 36 0.1 0.1 0.1 0.1 27.3 r2.6 44 36 31.3 34 r4 r6 1.6 1.3 1.3 12.9 5.3 1-pole n 3 15.4 0.05 5.1 0.05 0.05 0.05 5.1 20.5 2-pole 1.3 5 1.6 12.9 3 0.05 0.05 0.05 18.8 3.9 12.9 2.2 4 0.5 2 ? 6.3x90 ? 3.2 snap-in mounting type kea-print r 2.4 31.6 27.6 27.3 r 2.6 30 31.3 34 r4 0.1 0.1 0.1 1.6 1.3 1.3 12.9 5.3 1-pole n 3 15.4 0.05 5.1 0.05 0.05 0.05 5.1 20.5 2-pole 1.3 5 1.6 12.9 3 0.05 0.05 0.05 2.2 4 0.5 2 s 0.1 1. 5 18.8 12.9 3.9
4 power entry modules without line filter kea-print https://www.schurter.com /pg05 connectors diagrams with internal connections 1-pole n n e 3 l with internal connections 2-pole 5 n e 3 l derating curves 1-pole admissible power acceptance in watt 02 04 06 08 0 100 i = << i n i = 0.7 i n i = 1.0 i n 2.0 1.5 1.0 0.5 0.0 ambient air temperature ta c 2-pole admissible power acceptance in watt per pole 02 04 06 08 0 100 0.2 0.0 i = << i n i = 0.7 i n i = 1.0 i n 1.6 0.6 0.4 0.8 1.2 1.0 1.4 ambient air temperature ta c all variants type panel mounting panel thickness s [mm] fuseholder voltage selector internally wired order number kea-print snap-in 1.5 1-pole - l 4301.3212 kea-print snap-in 2 1-pole - l 4301.3213 kea-print snap-in 2.5 1-pole - l 4301.3214 kea-print snap-in 1.5 2-pole - l 4301.3202 kea-print snap-in 2 2-pole - l 4301.3203 kea-print snap-in 2.5 2-pole - l 4301.3204 kea-print screw - 1-pole - l 4301.3211 kea-print screw - 2-pole - l 4301.3201 packaging unit 5 pcs required accessory description fusedrawer 2 fusedrawer fr fuse links 5x20 mm, with or without voltage selector insert fingergrip, 2-pole 4301.1401 extra-safe, 2-pole 4301.1403 fingergrip, 1-pole 4301.1405 extra-safe, 1-pole 4301.1407 ...
5 power entry modules without line filter kea-print https://www.schurter.com /pg05 connectors accessories cord retaining kits cord retaining strain relief flat head, a 4700.0001 countersunk, b 4700.0002 mating outlets/connectors category / description appliance outlet overview complete iec appliance outlet f, screw-on mounting, front side, solder terminal 4787 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 4788 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 5091 appliance outlet further types to kea-print connector overview complete 4782 mounting: power cord, 3 x 1 mm2 / 3 x 18 awg, cable, connector: iec c13 4782 4785 mounting: power cord, 3 x 1 mm2 / 3 x 18 awg, cable, connector: iec c13 4785 4300-06 mounting: power cord, 3 x 1 mm2 / 3 x 18 awg, cable, connector: iec c13 4300-06 iec connector c15 for hot conditions 120c, rewireable, straight 4781 iec connector c15 for hot conditions 120c, rewireable, angled 4784 connector further types to kea-print ... mating outlets/connectors shuttered power cord overview complete vac13ks, overview, v-lock cord retaining, diverse connector iec c13, diverse, black vac13ks power cord with iec connector c17, v-lock, straight vac17ks power cord further types to kea-print the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 10.10.2018
|
